Teensy® 4.0 Development Board (Headers Pre-soldered)
$54.34 Inc. GST
The Teensy® 4.0 Development Board uses a powerful ARM Cortex-M7 NXP iMXRT1062 32-bit processor clocked at 600mHz, putting it in a class of its own in terms of raw performance. The competitive 40 pin I/O array makes the Teensy 4.0 an extremely flexible controller for both small and large-scale projects requiring high processing power and a small form factor.
Out of stock
Learn How to Use This Microcontroller!
The Teensy® 4.0 Development Board uses a powerful ARM Cortex-M7 NXP iMXRT1062 32-bit processor clocked at 600mHz, putting it in a class of its own in terms of raw performance. The competitive 40-pin I/O array makes the Teensy® 4.0 an extremely flexible controller for both small and large-scale projects requiring high processing power and a small form factor. With up to 4 times larger flash memory than its predecessor, it is a great upgrade for memory-intensive projects.
The Teensy® 4.0 can be programmed using the well-known Arduino IDE as well as the Teensyduino software and comes with the headers pre-soldered, so it is ready to be used right out of the box!
Features
- ARM Cortex-M7 at 600 MHz
- Float point math unit, 64 & 32 bits
- 1984K Flash, 1024K RAM (512K tightly coupled), 1K EEPROM (emulated)
- USB device 480 Mbit/sec & USB host 480 Mbit/sec
- 40 digital input/output pins, 31 PWM output pins
- 14 analog input pins
- 7 serial, 3 SPI, 3 I2C ports
- 2 I2S/TDM and 1 S/PDIF digital audio port
- 3 CAN Bus (1 with CAN FD)
- 32 general-purpose DMA channels
- Cryptographic Acceleration & Random Number Generator
- RTC for date/time
- Programmable FlexIO
- Pixel Processing Pipeline
- Peripheral cross triggering
- Power On/Off management
Performance comparison
The ARM Cortex-M7 brings many powerful CPU features to a true real-time microcontroller platform. CPU performance is many times faster than typical 32-bit microcontrollers.
The ARM Cortex-M7’s superior performance against other controllers is shown below:
Teensy® 4.0 Development Board Pin assignments
Engineering Drawings
Note: Dimensioned Drawings are in mm.
Included:
- Pre-soldered Teensy® 4.0 development board
- Information docket
Documentation:
Software:
- For software compatible with the Teensy® 4.0 please see here.
Note:
- This board uses 3.3V logic (It is recommended to use 3.3 -5V logic converters)
- This controller uses a micro USB cable. (Not included)
| Weight | 0.06 kg |
|---|---|
| Dimensions | 10 × 3 × 5 cm |
Related products
