24V Geared-DC Motor – High Torque 100-185 RPM With Encoder

$126.00 Inc. GST

These heavy-duty all-metal geared 775 DC Motors offer high torque and speed. These DC Motors are great for robotics projects where high torque is required which include but are not limited to; medium and large-scale mobile robots, heavy-duty linear actuators. The gearboxes feature all metal planetary gear sets ensuring a long service life and reliability.

These heavy-duty planetary geared 775 DC Motors offer high torque and speed. These DC Motors are great for robotics projects where high torque is required which include but not limited to; medium and large-scale mobile robots and heavy-duty linear actuators. The gearboxes feature all metal planetary gear sets ensuring a long service life and reliability. These motors have an encoder attached for precise movement or odometry in localisation-dependent tasks such as mapping robots.

Available in different speeds and torque selections, these motors will offer a robust solution for any automation project. The built-in screw power terminals and JST XHP connector for the encoder make it easy to interface with the connector.

The motor can easily be controlled by the Roboclaw series of motor drivers or the 24V 7A Dual-Channel DC Motor Driver.

Easy Interfacing:

This motor was specially designed to make it easy to work with both hobbyist and industrial applications

No soldering is required to interface to this motor electronically
A 2-pin 5.08mm screw terminal connector is
A 4-pin JST-XHP-4 pin connector for the encoder power input and signal outputs

Motor Specifications:

Rated Voltage: 24V
Motor Brush Type: Graphite

SKU	No Load Speed	Load Speed	No Load Current	Load Current	Rated torque Kgf.cm
MB-ELC-PGM-775-24V-118-E	118	100	0.8A	2.0A	30.0
MB-ELC-PGM-775-24V-185-E	185	157	0.650A	3.8A	18.7

Planetary Gearbox Specifications:

The 775 motors are paired with a high-performance all-metal planetary gearbox, offering high torque in a compact package.

Gearbox Housing Material: Steel
Gear Material: Steel
Gear ratio: 32.5, 50.9
Maximum Gearbox Running torque: 200kgf-cm
Double bearing supports at the output shaft

Encoder Details:

Specifications:

Operating voltage: 5V
Pulses per revolution: 7
Encoder Resolution: 50.9KE7 = 1425, 26.9KE7 = 753 counts/revolution
Connector type: JST-XHP-4

Encoder Pinout:

Pin 1: 5VDC
Pin 2: GND
Pin 3: Encoder Output Ch. A
Pin 4: Encoder Output Ch. B

Engineering Drawings

Tips and Tricks:

Pair these motors with our Roboclaw series of drivers.
Get precise control over your robot using the built-in encoder

Please Note:

The encoder cable is sold separately. Please find it here.

Weight

N/A

Dimensions

N/A

RPM

118RPM

185RPM